Slippage Auditor: Person Information – Different – 11 June 2025

Desk of contents

1. Slippage Panel: Factor Explanations
2. Working with the Panel
3. Understanding VIEW MODE Show
4. VIEW MODE — Account Forex Show
5. Rounded Values and Inner Precision
6. Dealing with of Partially Closed Positions
7. Minimizing and Closing the Panel
8. Troubleshooting

This part explains every parameter of the Slippage Auditor EA. The settings are structured into logically grouped sections, every labeled with a descriptive heading for higher readability.

=== GENERAL FILTER SETTINGS ===

1. Magic Quantity Filter. Filters trades by a particular Magic Quantity. Set to ‘0’ to incorporate all trades no matter Magic Quantity.

=== SLIPPAGE MONITORING SETTINGS ===

2. Knowledge Columns (scrollable). Defines what number of columns of slippage information to incorporate within the inside desk. If extra columns are outlined than might be proven directly, you possibly can scroll horizontally inside the desk.

3. Knowledge Rows (scrollable). Defines what number of rows of slippage information to incorporate. If extra rows are outlined than seen, you possibly can scroll vertically to entry all information.

=== DATE FILTER SETTINGS ===

4. Begin Date. The beginning date of the closed trades to be included within the evaluation. Solely closed trades inside this date vary are evaluated.

5. Finish Date. The ending date of the closed trades to be included within the evaluation. Make sure that this date consists of the newest trades you wish to audit.

Observe: Solely closed positions between the desired Begin Date and Finish Date shall be analyze

Consists of slippage desk clarification, button performance, and panel parts.

1. Slippage Panel: Factor Explanations

1. VIEW MODE Cycles between totally different show modes for the desk content material: – Slippage in factors – Order open/shut occasions – Slippage in account forex Click on the button to change between these modes.

2. UPDATE SLIPPAGE Recalculates and refreshes slippage information for all closed trades inside the chosen time vary. Use this after closing new trades or adjusting enter settings.

3. SYMBOL Shows the buying and selling image being analyzed. Every row corresponds to a distinct instrument with closed trades within the chosen time interval.

4. ALL SLIPPAGE Shows the entire slippage for all closed trades of the corresponding image. Optimistic values seem in inexperienced; destructive values in pink.

Observe: This worth is calculated primarily based on trades closed between the Begin Date and Finish Date set within the EA inputs. Solely closed positions are included. The displayed format will depend on the chosen VIEW MODE .

5. OPEN 1 Reveals slippage on place opening. Helps assess execution delay or entry effectivity.

6. CLOSE 1 Reveals slippage on place closing. Helpful for evaluating how precisely trades are exited.

Observe (for OPEN and CLOSE): After every replace, probably the most lately closed place is displayed as OPEN 1 / CLOSE 1. Earlier positions are shifted to OPEN 2 / CLOSE 2, if seen.

2. Working with the Panel

This part demonstrates how the Slippage Panel behaves when the UPDATE SLIPPAGE button is pressed. The method is asynchronous, which means that whereas new information is being processed, the beforehand loaded values stay seen and unchanged till the replace is full.

A. Preliminary State The panel is empty. No slippage information is proven. The VIEW MODE button is inactive. This sometimes happens simply after including the EA to the chart or after clearing the info.

B. Loading Knowledge processing begins. Each the UPDATE SLIPPAGE and VIEW MODE buttons are disabled. Whereas the system processes closed commerce information, the earlier content material (if any) stays seen till new outcomes are prepared. The extra trades should be processed, the longer this part will take.

C. Knowledge Displayed The panel is populated with slippage outcomes. The VIEW MODE button turns into lively once more, permitting you to change between show modes.

Observe:

• If no closed trades are discovered within the chosen time vary, the panel will stay empty even after the replace.
• You may press UPDATE SLIPPAGE once more at any time to refresh the outcomes with new closed positions.
• Throughout the replace, no partial updates are seen — outcomes are changed solely when absolutely prepared.

3. Understanding VIEW MODE Show

Determine 1: VIEW MODE. Slippage in factors.

1. ALL SLIPPAGE — shows the entire slippage in uncooked factors for every image.
2. OPEN/CLOSE — exhibits the slippage (in factors) individually for entry and exit operations.

• Inexperienced values point out constructive or zero slippage.
• Purple values point out destructive slippage.

—

Determine 2: VIEW MODE. Order open/shut occasions.

1. ALL SLIPPAGE — calculated in uncooked factors, identical as within the default mode.
2. OPEN/CLOSE — exhibits the precise date and time when the order was opened and closed.

Observe: After every replace, probably the most lately closed place is proven in OPEN 1 / CLOSE 1. Earlier positions (if out there) are shifted into OPEN 2 / CLOSE 2.

—

Determine 3: VIEW MODE. Slippage in account forex and lot dimension.

1. ALL SLIPPAGE — shows the entire slippage for every image within the account forex (e.g., USD).
2. OPEN/CLOSE — exhibits particular person slippage for place entry and exit, additionally in account forex, however with out the forex image. The slippage worth is adopted by the corresponding lot dimension in parentheses. This permits customers to see not solely the slippage quantity but in addition how a lot quantity was concerned in that commerce execution.
   Instance Show Format

   XAUUSD OPEN 1: -2.72 (0.34)

   On this instance:

   • The slippage for opening the place was -2.72 (in account forex).
   • The lot dimension of the corresponding deal was 0.34 heaps.
   • That is clearly displayed as: -2.72 (0.34).

4. VIEW MODE — Account Forex Show

Determine 1: VIEW MODE. Account forex USD

1. ALL SLIPPAGE — exhibits whole slippage within the account’s forex (USD on this case), together with the forex suffix.
2. OPEN / CLOSE — exhibits particular person slippage values for opening and shutting operations. These are additionally in account forex however with out the forex label for readability.
3. Account Forex — confirmed under the panel by the stability line exhibiting ‘USD’.

This confirms that every one values are expressed relative to the account’s base forex.

—

Determine 2: VIEW MODE. Account forex JPY

1. ALL SLIPPAGE — shows slippage in Japanese Yen (JPY) with the forex suffix proven.
2. OPEN / CLOSE — per-position slippage values proven in the identical account forex, with out repeating the forex image.
3. Account Forex — verified under within the commerce terminal exhibiting ‘JPY’.

No matter forex sort, all values are calculated and transformed into the account base forex.

5. Rounded Values and Inner Precision

Generally the worth proven within the ALL SLIPPAGE column might not precisely match the sum of the seen particular person values. It’s because the values within the OPEN and CLOSE columns are rounded for show functions, whereas the entire is calculated utilizing full inside precision (as much as 5 decimal locations).

✅ The ALL SLIPPAGE worth is correct — it merely displays full-precision inside calculations.

6. Dealing with of Partially Closed Positions

In MetaTrader, a single place might be closed in a number of phases — this is named a partial closure. Every portion of {a partially} closed place is recorded as a separate deal within the terminal’s historical past, although they originate from the identical order.

The Slippage Auditor panel handles every of those offers individually. Because of this, you will see a number of entries for a similar image, all sharing the identical Open Time, however with totally different Shut Occasions and doubtlessly totally different slippage values.

This conduct is very noticeable in VIEW MODE : Open/Shut Time, the place you possibly can observe how one place seems a number of occasions with equivalent open timestamps.

Observe: As a result of partial offers are handled individually, the slippage per deal might differ and doesn’t mirror the general slippage of the unique full-size place.

Determine 1: The identical place was partially closed in two steps. The panel shows two rows with the identical Open Time however totally different Shut Occasions.

—

Determine 2: Three partial closures of the identical place. Every row represents one cope with its personal Shut Time.

—

Determine 3: Full breakdown of a place closed in 5 separate offers. All rows share the identical Open Time, every exhibiting a distinct exit time.

Further Observe on Slippage in Account Forex Mode

In VIEW MODE : Slippage in account forex, the slippage of every partially closed place is calculated proportionally primarily based on the deal dimension. This ensures that every one partial offers contribute precisely to the general consequence.

Because of this, the worth proven in ALL SLIPPAGE stays mathematically appropriate even when a place is closed in a number of steps. Every slippage worth displays each the value distinction and the corresponding lot dimension, making the aggregated whole dependable.

Every partial deal is transformed individually to the account forex utilizing each lot dimension and slippage in factors. The overall is mathematically correct and represents the true account impression of the complete place’s execution.

7. Minimizing and Closing the Panel

The Slippage Panel might be minimized or closed utilizing the usual management buttons within the prime proper nook of the window:

• ▼ Decrease – Collapses the panel to a single header line. This retains the panel seen however hides the info rows, saving display screen area.

• × Shut – Fully removes the panel from the chart. You have to to reattach the EA if you wish to show it once more.

Use the decrease choice to shortly declutter your chart with out absolutely disabling the device.

Determine 1: Slippage Panel in full view with shut and decrease buttons highlighted.

—

Determine 2: Slippage Panel minimized utilizing the ▼ button, exhibiting solely the title bar.

8. Troubleshooting

If the Slippage Auditor panel doesn’t present information after clicking UPDATE SLIPPAGE , it is strongly recommended to verify the Specialists log tab within the terminal.

This log might show system messages that assist establish the issue. One widespread message is:

* * * No account historical past or saved information for calculate slippage: 0

This implies there are not any closed positions inside the outlined date vary or no commerce information was loaded from the server.

Methods to resolve:

• Make sure that there are closed trades within the account historical past that match the date vary set within the EA settings.
• Be sure that Begin Date and Finish Date are configured accurately.
• Test if the required symbols can be found and visual within the terminal.
• If wanted, right-click on the “Account Historical past” tab and choose “All Historical past” to drive the terminal to load lacking information.

If the issue persists, please contact the creator for help.