CRT Ghost Candle HTF Fractal — Full Setup & Person Information (Official Documentation for MT5 and MT4) - Buying and selling Programs - 19 February 2026

CRT Ghost Candle HTF Fractal — Full Setup & Person Information

That is the official setup and consumer information for CRT Ghost Candle HTF Fractal, overlaying each function, enter setting, and configuration step from set up to each day use.

Whether or not you commerce on MT5 or MT4, whether or not you’re new to CRT ideas or already use ICT and SMC strategies, this information walks by each module within the indicator so you’ll be able to set it up appropriately and perceive precisely what every function does.

MT5 Model: https://www.mql5.com/en/market/product/162075

MT4 Model: https://www.mql5.com/en/market/product/162556

Free Demo: Out there on each product pages. Set up the demo first to comply with together with this information.

If something on this information is unclear, message me straight through MQL5. I reply to each message.

Desk of Contents

What This Indicator Does (And What It Does Not Do)
Set up and First Load
Chart Theme Setup
Module 1 — Ghost Candle HTF Projection
Module 2 — CRT Lure Ranges
Module 3 — Earlier Interval Ranges (PDH/PDL, PWH/PWL, PMH/PML)
Module 4 — Session Ranges (Asian, London, New York)
Module 5 — Pivot Factors (Basic and Weighted)
Module 6 — Interval Separators
Module 7 — Bias Dashboard
Module 8 — CRT Alerts (Desktop, Cell, E mail)
Advisable Setups for Totally different Buying and selling Types
Incessantly Requested Questions
Troubleshooting
Model Historical past

1. What This Indicator Does (And What It Does Not Do)

CRT Ghost Candle HTF Fractal is an entire market construction and context toolkit. It combines eight modules right into a single indicator:

Ghost Candle HTF Projection (higher-timeframe candles on lower-timeframe charts)
CRT Lure Ranges (automated liquidity sweep detection)
Earlier Interval Ranges (PDH/PDL, PWH/PWL, PMH/PML)
Session Ranges (Asian, London, New York highs and lows)
Pivot Factors (Basic and Weighted, Weekly and Month-to-month)
Interval Separators (timeframe, each day, weekly, month-to-month boundaries)
Bias Dashboard (each day and weekly directional studying)
CRT Alerts (desktop popup, cellular push, e-mail)

Every module will be turned on or off independently utilizing its toggle swap within the enter settings.

What it does NOT do:

This indicator doesn’t generate purchase or promote indicators. It doesn’t place trades, handle positions, or implement any particular technique. It’s a pure context and construction framework. You make the buying and selling selections. The indicator provides you the structural info to make these selections with readability.

It really works on all MT5 and MT4 symbols: Foreign exchange pairs, Gold, Silver, Indices (US30, NAS100, DE40), Crypto, and Oil.

2. Set up and First Load

3. Chart Theme Setup

The indicator consists of 4 built-in chart themes that apply mechanically on first load. This ensures a clear, skilled chart look with out handbook configuration.

Enter: Chart Theme (beneath “CHART THEME” group)

Choices:

Maintain Your Chart Settings — The indicator doesn’t change something about your chart. Use this if you have already got a customized template you like.
Institutional (White Background) — White background, black candle outlines, white bullish our bodies, black bearish our bodies. Clear institutional look with no grid.
Darkish Mode (Black Background) — Black background, inexperienced candle outlines, black bullish our bodies, white bearish our bodies. Designed for low-light buying and selling environments.
Customary Default (Coloured on White) — White background with customary inexperienced bullish and purple bearish candle fills. Grid disabled for readability.

The theme is utilized as soon as on first load and everytime you change timeframes or reload the indicator. If you’re operating the indicator within the Technique Tester visible mode, the theme reapplies on each new bar to forestall the tester from resetting chart colours.

Advice: Begin with “Customary Default” or “Institutional (White Background)” for the cleanest view of all indicator modules. The ghost candle colours (blue for bullish, darkish gray for bearish) are designed to distinction properly towards each white and black backgrounds.

4. Module 1 — Ghost Candle HTF Projection

That is the core visible function of the indicator. It attracts higher-timeframe candles as clear “ghost” overlays to the best of the present value in your lower-timeframe chart.

What It Exhibits

Every ghost candle represents one accomplished (or forming) higher-timeframe candle. For instance, if you’re buying and selling on M15 and set TF1 to H1, you will note H1 candles rendered as visible blocks to the best of your reside chart. This lets you see the higher-timeframe image with out switching charts.

The latest ghost candle (index 0) updates in actual time as the present higher-timeframe candle kinds. Older ghost candles present accomplished historic construction.

Three Impartial Timeframe Clusters

The indicator helps as much as three simultaneous HTF clusters, every absolutely impartial:

TF1 (Anchor/Major) — Default: H1. Your main context timeframe.

TF2 (Development/Secondary) — Default: H4. Your broader development reference.

TF3 (Macro/Tertiary) — Default: D1. Disabled by default. Allow for macro context.

Every cluster has its personal toggle (Present TF1, Present TF2, Present TF3), its personal timeframe choice, and its personal candle depend setting.

Key Enter Settings

Present TF1 / TF2 / TF3 — Toggle every cluster on or off. Solely enabled clusters are drawn and devour sources.

TF1 / TF2 / TF3 Timeframe — Choose the higher-timeframe interval. This should be increased than your chart timeframe. For instance, in case your chart is M15, set TF1 to H1 or H4. Setting it to M5 wouldn’t present helpful context.

Candle Rely — What number of ghost candles to show per cluster. Default is 3. Growing this reveals extra historical past however requires extra chart shift area. Values of three to five work properly for many setups.

Hole between Clusters (Bars) — Spacing between TF1, TF2, and TF3 ghost candle teams. Default is 10 bars. Enhance this if clusters overlap visually.

Hole between Stay Value and Ghosts — Spacing between the present reside value space and the primary ghost candle cluster. Default is 20 bars. This ensures ghost candles don’t overlap together with your buying and selling space.

Candle Width (Bars) — How huge every ghost candle physique is rendered. Default is 3 bars. Wider candles are simpler to see however take more room.

Bullish Colour / Bearish Colour — Default is Institutional Blue for bullish and Darkish Gray for bearish. You may change these to match your choice.

Fill Physique — Whether or not to fill the candle physique with strong colour or go away it as a top level view. Default is crammed.

Sweep Strains

When “Present Excessive/Low Sweep Ranges” is enabled (default: on), the indicator attracts horizontal traces connecting the highs and lows of consecutive ghost candles. If a candle has swept the earlier candle’s excessive or low (and closed again inside), the sweep line turns into thicker and an “S” marker seems.

That is the visible illustration of CRT logic utilized on to the ghost candle cluster.

Timeframe Labels

Every cluster shows a label above the ghost candles displaying the timeframe (for instance, “H1” or “H4”). This helps you immediately establish which cluster represents which timeframe.

Screenshot displaying three ghost candle clusters (H4, D1, W1) aspect by aspect on an M15 chart.

5. Module 2 — CRT Lure Ranges

CRT Lure Ranges are the analytical core of this indicator. They mechanically detect Candle Vary Concept liquidity sweeps on the chosen increased timeframe and draw the corresponding vary ranges straight in your execution chart.

How CRT Detection Works

The indicator scans backward by higher-timeframe candle historical past (managed by the Scan Depth setting) and checks every candle pair for this sample:

A CRT occasion happens when Candle 1 sweeps past Candle 0’s excessive or low, then closes again inside Candle 0’s vary. This represents a liquidity seize adopted by rejection — the muse of Candle Vary Concept.

Particularly:

Bullish CRT (Low Sweep): Candle 1’s low goes beneath Candle 0’s low, however Candle 1’s shut stays above Candle 0’s low. This means that sell-side liquidity was taken and value rejected decrease costs.
Bearish CRT (Excessive Sweep): Candle 1’s excessive goes above Candle 0’s excessive, however Candle 1’s shut stays beneath Candle 0’s excessive. This means that buy-side liquidity was taken and value rejected increased costs.

Pending vs Accomplished CRT

This can be a essential distinction that separates this indicator from handbook CRT evaluation.

Pending CRT (Strong Strains, Orange by Default)

A CRT degree is pending when the sweep has been detected however value has not but damaged the alternative aspect of the vary. The vary excessive and vary low are drawn as strong horizontal traces extending from the reference candle’s time to the present value space.

Pending CRT means: the setup exists, nevertheless it has not been invalidated or confirmed by subsequent value motion. That is context, not a sign.

Accomplished CRT (Dotted Strains, Gray by Default)

A CRT degree turns into accomplished when the reside candle’s value reaches the alternative boundary. For a Bullish CRT, completion happens when the present candle’s excessive reaches the reference candle’s excessive. For a Bearish CRT, completion happens when the present candle’s low reaches the reference candle’s low.

Accomplished CRT ranges are marked with a checkmark image (✓) and drawn in dotted fashion to visually distinguish them from lively pending ranges.

Each-Aspect Sweep Filter

That is a sophisticated filter enabled by default. When a candle sweeps BOTH the excessive and the low of the reference candle, it’s categorised as unstable growth somewhat than real manipulation. These occasions are filtered out mechanically.

Why this issues: a candle that takes either side of liquidity in a single bar is usually pushed by information or volatility occasions, not institutional positioning. Eradicating these retains your CRT ranges clear and centered on real sweep setups.

Enter: Filter Out Each-Aspect Sweeps (default: true)

Set this to false if you wish to see all sweeps together with double-sided ones. Most merchants ought to go away this enabled.

Key Enter Settings

Present CRT Lure Ranges — Grasp toggle for this whole module.

Scan Depth (Historical past Test) — What number of higher-timeframe candles to scan backward for CRT occasions. Default is 5. Growing this reveals older CRT ranges however could muddle the chart. Values of three to eight work properly.

Pending CRT Colour — Default: Orange. Colour for lively, unconfirmed CRT vary ranges.

Accomplished CRT Colour — Default: Gray. Colour for confirmed, accomplished CRT vary ranges.

Customary Line Thickness — Controls the thickness of CRT traces. Default is 2.

Screenshot displaying each pending (strong orange) and accomplished (dotted gray with ✓) CRT ranges on DAX (DE40/GER30) M5.

6. Module 3 — Earlier Interval Ranges

This module attracts Earlier Day, Earlier Week, and Earlier Month highs and lows mechanically in your chart. These are among the many mostly referenced ranges in institutional buying and selling and ICT methodology.

What It Attracts

PDH / PDL — Earlier Day Excessive and Earlier Day Low
PWH / PWL — Earlier Week Excessive and Earlier Week Low
PMH / PML — Earlier Month Excessive and Earlier Month Low

Every degree is drawn as a horizontal line spanning from the interval’s open time to the present value space (for the newest set) or to the subsequent interval’s boundary (for older units).

Lookback Depth

The Lookback Interval setting controls what number of earlier intervals are proven. Default is 5, which means you will note the final 5 earlier day highs and lows, the final 5 earlier week highs and lows, and so forth.

Solely the newest set (lookback index 0) shows labels to maintain older ranges clear. Older ranges seem as unlabeled horizontal traces so you’ll be able to see historic confluence with out chart muddle.

Label Positioning

You’ve got full management over the place labels seem:

Labels on Proper Aspect (default: true) — Labels seem close to the present value, making them straightforward to learn throughout reside buying and selling.
Labels on Left Aspect — Labels seem on the line’s origin level (the interval boundary). Some merchants favor this to see the place the extent originated.
Excessive Label Place — Above the Line or Beneath the Line. Default: Above. Controls whether or not the “PDH” label sits above or beneath the horizontal degree.
Low Label Place — Above the Line or Beneath the Line. Default: Beneath.

Key Enter Settings

Present Earlier Interval Ranges — Grasp toggle.

Present Earlier Day H/L — Toggle PDH/PDL. Default: on.

Present Earlier Week H/L — Toggle PWH/PWL. Default: on.

Present Earlier Month H/L — Toggle PMH/PML. Default: off (to cut back visible density on smaller timeframes).

Lookback Interval — Variety of historic units to show. Default: 5. Most: 50.

Colours — Every degree pair has its personal colour: PDH/PDL in Dodger Blue, PWH/PWL in Medium Purple, PMH/PML in Darkish Orange. All customizable.

Line Fashion and Thickness — Default: Dashed traces, thickness 1. Retains earlier interval ranges visually distinct from CRT entice ranges (which use strong traces).

Screenshot displaying PDH/PDL in blue and PWH/PWL in purple on an M15 chart with labels.

7. Module 4 — Session Ranges

This module tracks the excessive and low of every main buying and selling session and attracts them in your chart. Periods are outlined by server time, with absolutely adjustable begin and finish hours.

Three Periods Tracked

Asian Session (AS) — Default: 01:00 to 10:00 server time. Colour: Goldenrod.
London Session (LD) — Default: 10:00 to 19:00 server time. Colour: Metal Blue.
New York Session (NY) — Default: 16:30 to 00:00 server time. Colour: Indian Crimson.

Every session attracts two horizontal traces: the session excessive and the session low, spanning from the session begin time to the session finish time (or to the present value if the session remains to be lively).

How Session Ranges Kind

The indicator scans all chart bars throughout the outlined session window and finds the best excessive and lowest low. If the session remains to be in progress (has not reached the tip time), the degrees replace in actual time as new bars kind. As soon as the session closes, the degrees are locked.

Adjusting Session Occasions for Your Dealer

That is the most typical configuration step.

The default session hours are set for a typical GMT+2 (or GMT+3 throughout daylight saving) dealer server time, which is the usual for many Foreign exchange brokers.

In case your dealer makes use of a distinct server time offset, it’s worthwhile to alter the session begin and finish hours accordingly.

How you can discover your dealer’s server time:

Open any chart in MetaTrader. Have a look at the time proven on the horizontal axis. Examine it to your native time and to GMT. The distinction is your dealer’s server time offset.

Instance changes:

In case your dealer runs on GMT+0 (UTC), subtract 2 hours from every default setting. The Asian session would develop into 23:00 (earlier day) to 08:00, London would develop into 08:00 to 17:00, and New York would develop into 14:30 to 22:00.

In case your dealer runs on GMT+3, add 1 hour to every default.

The indicator accepts begin and finish hours and minutes individually, so you’ll be able to set exact boundaries like 16:30 for the New York open.

Midnight Wrapping

The New York session default ends at 00:00 (midnight). The indicator handles midnight wrapping mechanically. If the tip time is sooner than or equal to the beginning time, the indicator is aware of the session crosses midnight and calculates accordingly.

Lookback

The Session Lookback setting controls what number of days of session ranges are displayed. Default is 1 (right this moment solely). Set to 2 or 3 to see yesterday’s and the day earlier than’s session ranges as properly.

Label Alignment

Session labels will be positioned in three places:

Left — On the session begin time (default)
Proper — On the session finish time or present value
Heart — Midpoint of the session vary

Labels are solely proven on the newest day (day 0) to maintain older session ranges clear.

Screenshot displaying Asian (gold), London (blue), and New York (purple) session ranges on USTEC/ NQ M15 chart.

8. Module 5 — Pivot Factors

This module calculates and attracts customary pivot level ranges utilizing the earlier interval’s excessive, low, and shut. Two calculation strategies can be found, and each weekly and month-to-month pivots are supported.

Calculation Strategies

Basic Pivot: PP = (Excessive + Low + Shut) / 3

Weighted Pivot: PP = (Excessive + Low + 2 × Shut) / 4

The Weighted methodology provides extra significance to the closing value, which many institutional merchants favor as a result of the shut displays the ultimate consensus of the interval.

Enter: Pivot Calculation Methodology (default: Weighted)

Out there Ranges

From the pivot level (PP), the indicator calculates:

R1 and S1 — First resistance and help: R1 = (2 × PP) − Low, S1 = (2 × PP) − Excessive
R2 and S2 — Second resistance and help: R2 = PP + (Excessive − Low), S2 = PP − (Excessive − Low)
R3 and S3 — Third resistance and help: R3 = Excessive + 2 × (PP − Low), S3 = Low − 2 × (Excessive − PP)

Every pair (PP, R1/S1, R2/S2, R3/S3) will be toggled on or off independently. Default reveals solely PP. Allow the others based mostly in your evaluation wants.

Weekly vs Month-to-month

Present Weekly Pivots — Default: on. Calculates pivots from the earlier week’s excessive, low, and shut. The degrees span throughout the present week.

Present Month-to-month Pivots — Default: off. Calculates from the earlier month’s knowledge. Allow for swing buying and selling or to establish main structural ranges.

Lookback

Pivot Lookback (default: 5) controls what number of earlier pivot units are proven. Setting this to 1 reveals solely the present interval’s pivots. Setting it to three or 5 permits you to see historic pivot clusters, which is beneficial for figuring out recurring confluence zones.

Label and Visible Settings

PP Colour — Default: Gold
Resistance Colour (R1–R3) — Default: Crimson
Help Colour (S1–S3) — Default: Sea Inexperienced
Line Fashion — Default: Dotted. Retains pivot traces visually distinct from CRT and interval ranges.
Labels on Proper Aspect — Default: on. Labels seem with a “W” (Weekly) or “M” (Month-to-month) prefix.

Pivot labels comply with automated anchoring:

Resistance ranges and PP labels are positioned above the road. Help ranges are positioned beneath the road. This ensures labels by no means overlap with the worth degree they describe.

Screenshot displaying Weekly PP (gold), R1 (purple), and S1 (inexperienced) on H1 chart.

9. Module 6 — Interval Separators

Interval separators are vertical traces that mark the boundaries of particular time intervals in your chart. They enable you see the place one interval ends and one other begins.

Out there Separators

TF1 Separator — Marks the open of every TF1 candle. Syncs together with your TF1 timeframe setting. Solely seems when TF1 cluster is enabled.
TF2 Separator — Identical as above for TF2. Solely seems when TF2 cluster is enabled.
Each day Separator — Marks the beginning of every buying and selling day.
Weekly Separator — Marks the beginning of every buying and selling week.
Month-to-month Separator — Marks the beginning of every month.

Key Enter Settings

Present Interval Separators — Grasp toggle for all separators.

Separator Lookback (Rely) — What number of separators to attract. Default: 20. Most: 100.

Line Fashion — Default: Dotted. Use strong for extra distinguished boundaries.

Line Width — Default: 1.

Every separator sort has its personal colour setting and will be toggled independently.

Sensible use: Each day separators enable you see the beginning of every buying and selling day clearly, which is important for figuring out the Asian vary formation. TF1 separators enable you visually align the ghost candle cluster with the corresponding bars on the reside chart.

10. Module 7 — Bias Dashboard

The Bias Dashboard is a compact on-chart panel that reveals the present directional bias on Each day and Weekly timeframes, together with the particular reasoning behind every studying.

How Bias Is Decided

The dashboard reads the higher-timeframe construction and applies this logic (in precedence order):

1. CRT-Based mostly Bias (Highest Precedence)

If a CRT occasion is detected on the earlier two candles of the timeframe, the bias displays the CRT course:

— Bullish CRT (Low Sweep) → BULLISH

— Bearish CRT (Excessive Sweep) → BEARISH

2. Construction Break

If no CRT is current, the dashboard checks for structural breaks:

— Present shut above earlier excessive → BULLISH (“Break > Prev Excessive”)

— Present shut beneath earlier low → BEARISH (“Break < Prev Low”)

3. Failed Break (Sweep With out Comply with-By means of)

— Value went beneath earlier low however closed above it → BULLISH (“Failed Break < Prev Low”)

— Value went above earlier excessive however closed beneath it → BEARISH (“Failed Break > Prev Excessive”)

4. Inside Vary (No Sign)

If not one of the above circumstances are met, the bias reads NEUTRAL with “Inside Vary” as the rationale.

Dashboard Format

The panel shows:

Line 1: “MARKET BIAS” header

Line 2: DAILY bias (BULLISH, BEARISH, or NEUTRAL) with colour

Line 3: Each day bias purpose

Line 4: Separator

Line 5: WEEKLY bias with colour

Line 6: Weekly bias purpose

Customization

Dashboard X / Y Offset — Place the panel wherever in your chart. Default: top-left nook (10, 50).
Dashboard Width — Default: 180 pixels.
Background Colour — Default: Darkish gray panel.
Bullish / Bearish / Impartial Colours — Customise the bias textual content colours.

Tip: The dashboard is most helpful at the beginning of your buying and selling session. Test the each day and weekly bias earlier than on the lookout for any setups. If each timeframes agree (for instance, each present BULLISH with CRT causes), you may have robust confluence for a directional bias.

Shut-up screenshot of the Bias Dashboard displaying DAILY: BULLISH “CRT (Low Sweep)” and WEEKLY: BEARISH “Break < Prev Low”.

11. Module 8 — CRT Alerts

The alert system notifies you when a brand new CRT occasion is confirmed on any of your chosen timeframes. Alerts can be found through desktop popup, cellular push notification, and e-mail.

How Alerts Work

The indicator checks for brand new CRT confirmations on every new bar. A CRT alert fires when:

A confirmed CRT occasion is detected on the desired timeframe
The occasion has not been alerted earlier than (duplicate prevention)
The indicator has accomplished at the least one full calculation cycle

Duplicate Prevention

Every timeframe (TF1, TF2, TF3) maintains its personal alert state. The indicator tracks the candle time of the final alerted CRT occasion. If the identical CRT occasion remains to be current on the subsequent tick, no duplicate alert is distributed. You’ll obtain precisely one alert per confirmed CRT setup.

Reinit Suppression

While you swap timeframes, change enter parameters, or recompile the indicator, MetaTrader reinitializes it. With out suppression, this is able to hearth false alerts for current CRT ranges that had been already current earlier than the reinit.

The indicator suppresses all alerts in the course of the first calculation cycle after any reinit occasion. Regular alert operation resumes from the second bar onward.

Alert Message Format

Every alert consists of:
CRT course (BULLISH or BEARISH)
Sweep sort (Low Sweep or Excessive Sweep)
Image title
Timeframe
TF label (TF1, TF2, or TF3)
Vary boundaries (excessive and low costs)

Instance message:

CRT BULLISH (Low Sweep) | EURUSD | H1 (TF1) | Vary: 1.08450 – 1.09120

Setting Up E mail Alerts

Step 1: In MetaTrader, go to Instruments → Choices → E mail tab.

Step 2: Enter your SMTP server particulars. For Gmail, use:

— SMTP Server: smtp.gmail.com

— SMTP Port: 465

— SMTP Login: your Gmail handle

— SMTP Password: your Gmail App Password (not your common password)

Essential: Gmail requires an App Password when you’ve got 2-factor authentication enabled (which it’s best to). To create one, go to your Google Account → Safety → 2-Step Verification → App passwords. Generate a brand new one for “Mail” and use that in MetaTrader.

Step 3: Enter your “From” and “To” e-mail addresses. (Identical Gmail can be utilized)

Step 4: Click on “Take a look at” to confirm the connection.

Step 5: Within the indicator settings, allow “E mail Alert” beneath the CRT Alerts group.

Setting Up Cell Push Notifications

Step 1: Set up the MetaTrader 5 app (or MetaTrader 4 app for MT4 customers) in your smartphone from the App Retailer or Google Play.

Step 2: Open the cellular app. Go to Settings → Messages. You will note a MetaQuotes ID (an 8-character alphanumeric code, e.g., A1B2C3D4).

Step 3: In your desktop MetaTrader, go to Instruments → Choices → Notifications tab. Enter the MetaQuotes ID out of your telephone.

Step 4: Click on “Take a look at” to ship a check notification.

Step 5: Within the indicator settings, allow “Cell Push Notification” beneath the CRT Alerts group.

Key Alert Enter Settings

Allow CRT Alerts — Grasp toggle. Default: off. Flip this on to activate all the alert system.

Desktop Popup Alert — Exhibits a MetaTrader alert dialog in your display. Default: on (when grasp is enabled).

Cell Push Notification — Sends to your telephone. Default: on (when grasp is enabled).

E mail Alert — Sends an e-mail. Default: on (when grasp is enabled).

Alert on TF1 / TF2 / TF3 — Select which timeframe clusters set off alerts. Default: TF1 solely. Allow TF2 and TF3 if you would like alerts on a number of timeframes.

Tip: For many merchants, enabling alerts on TF1 (H1) is enough. Including TF2 (H4) alerts is beneficial for swing merchants. TF3 (D1) alerts are rare and finest fitted to place merchants.

When alerts are enabled, the Specialists tab in MetaTrader will show configuration reminders on indicator load, telling you precisely which alert varieties are lively and what to configure.

12. Advisable Setups for Totally different Buying and selling Types

Setup A: Scalper (M1–M5 Execution)

Chart Timeframe: M1 or M5
TF1: M15 (3 candles) — instant construction
TF2: H1 (3 candles) — session construction
TF3: Off
CRT Scan Depth: 3
Periods: Asian + London + New York all enabled
Earlier Interval Ranges: PDH/PDL on, PWH/PWL on, PMH/PML off
Pivots: Weekly PP solely
Alerts: TF1 solely
Pairs: EURUSD, GBPUSD, XAUUSD, or any

This setup provides fast-moving context with out overwhelming the chart. Session ranges and PDH/PDL are essential for scalping round key intraday ranges.

Setup B: Intraday Dealer (M15 Execution)

Chart Timeframe: M15
TF1: H1 (3 candles)
TF2: H4 (3 candles)
TF3: Off
CRT Scan Depth: 5
Periods: All three enabled
Earlier Interval Ranges: PDH/PDL + PWH/PWL on
Pivots: Weekly PP + R1/S1
Alerts: TF1 + TF2
Pairs: EURUSD, GBPUSD, GBPJPY, XAUUSD, US30, NQ, DAX and so forth.

That is the default beneficial setup and works properly for many ICT/SMC merchants. The H1 ghost candles present instant construction whereas H4 provides broader development context.

Setup C: Swing Dealer (H1 Execution)

Chart Timeframe: H1
TF1: H4 (5 candles)
TF2: D1 (3 candles)
TF3: Off
CRT Scan Depth: 8
Periods: Off (much less related on H1)
Earlier Interval Ranges: PWH/PWL + PMH/PML on
Pivots: Weekly + Month-to-month PP
Alerts: TF1 + TF2
Pairs: Any

Swing merchants profit from deeper scan depth and month-to-month pivots. Session ranges are much less related on H1 and above however you’ll be able to maintain them on if desired.

13. Incessantly Requested Questions

Q: Does this indicator work on MT4?

A: Sure. A devoted MT4 model is obtainable right here: https://www.mql5.com/en/market/product/162556 Each variations comprise the identical modules and logic.

Q: Does this indicator repaint?

A: No. The HTF candle projection is non-repainting. Ghost candles signify precise higher-timeframe OHLC knowledge. The present forming candle (index 0) updates in actual time because the HTF candle remains to be open, which is anticipated conduct, not repainting. As soon as the HTF candle closes, it’s locked.

Q: Does this indicator give purchase or promote indicators?

A: No. It supplies context and construction. You make the entry selections utilizing your personal mannequin.

Q: What’s the finest timeframe to make use of?

A: M15 as your chart timeframe with H1 and H4 as ghost candle clusters is essentially the most versatile setup. See Part 12 for detailed suggestions based mostly in your buying and selling fashion.

Q: Can I take advantage of this on Gold (XAUUSD)?

A: Sure. It really works on all MT5 and MT4 symbols together with Foreign exchange, Gold, Silver, Indices, Oil, and Crypto.

Q: Why do I not see the ghost candles?

A: Three attainable causes:

(1) Your chart is just too zoomed in. Zoom out or scroll proper to see the ghost candle space.

(2) Chart shift will not be enabled. The indicator allows it mechanically, however if you happen to manually disabled it, re-enable it through right-click → Properties → Frequent → Chart shift.

(3) The TF cluster toggle is off. Test that Present TF1, TF2, or TF3 is enabled within the settings.

Q: Why are my session ranges on the incorrect instances?

A: The session instances use server time, not your native time. Test your dealer’s server time offset and alter the session begin/finish hours accordingly. See Part 7 for particulars.

Q: Can I run this on a number of charts on the identical time?

A: Sure. Every chart occasion runs independently. Bear in mind that every occasion creates chart objects, so operating it on many charts concurrently will enhance reminiscence utilization.

Q: What number of activations do I get?

A: Test the present activation depend on the product web page. Should you want extra activations, message me through MQL5.

Q: I bought the indicator however I’m not certain the way to set it up for my dealer. Are you able to assist?

A: Completely. Message me through MQL5 together with your dealer title and server time, and I’ll present the right session time settings to your particular dealer.

14. Troubleshooting

Drawback: Indicator masses however nothing seems on chart.

Answer: Be sure to have sufficient historic knowledge loaded. Go to Instruments → Choices → Charts and enhance “Max bars in chart” to at the least 10,000. Then right-click the chart and choose Refresh. Additionally confirm that at the least one module grasp toggle is enabled (Present TF1, Present CRT Lure Ranges, and so forth.).

Drawback: Ghost candles overlap with reside value space.

Answer: Enhance the “Hole between Stay Value and Ghosts” setting. Default is 20 bars. Strive 30 or 40. Additionally strive zooming out the chart barely.

Drawback: E mail alerts usually are not arriving.

Answer: First confirm that e-mail is configured appropriately in Instruments → Choices → E mail by clicking “Take a look at.” If the check succeeds however indicator alerts don’t arrive, examine that (1) Allow CRT Alerts is turned on, (2) E mail Alert is checked, (3) No less than one TF alert (Alert on TF1/TF2/TF3) is enabled. For Gmail customers, ensure you are utilizing an App Password, not your common Gmail password.

Drawback: Cell push notifications usually are not arriving.

Answer: Confirm your MetaQuotes ID in Instruments → Choices → Notifications and click on “Take a look at.” If the check notification reaches your telephone however indicator alerts don’t, examine the identical settings as the e-mail troubleshooting above. Additionally guarantee your telephone’s MetaTrader app has notification permissions enabled in your telephone’s system settings.

Drawback: CRT ranges appear incorrect or lacking.

Answer: Enhance the Scan Depth setting (default: 5) to scan extra historic candles. Additionally examine that the Each-Aspect Sweep Filter will not be eradicating legitimate setups — strive setting it to false briefly to see all detected CRT occasions.

Drawback: Labels are overlapping.

Answer: Alter label positions (Above/Beneath Line settings) for the overlapping module, or change label alignment (Left/Proper/Heart). You can too cut back the PPL or Pivot Lookback to indicate fewer historic ranges.

Drawback: Chart seems to be cluttered with too many ranges.

Answer: Flip off modules you don’t at the moment want utilizing their grasp toggles. A great start line is: Ghost Candles on, CRT on, Periods on, all the pieces else off. Add modules one after the other as you develop into accustomed to every.

15. Model Historical past

Model 5.3 (February 2026) — Alert reinit suppression to forestall false alerts on timeframe swap or parameter change — Each-Aspect Sweep Filter for CRT entice ranges — Interval Separators module (TF1, TF2, Each day, Weekly, Month-to-month) — Person expertise enhancements

Model 5.0 – 5.2 — Session Ranges module (Asian, London, New York) — Earlier Interval Ranges module (PDH/PDL, PWH/PWL, PMH/PML) — Pivot Factors module (Basic and Weighted) — CRT Alert system (Desktop, Cell, E mail) — Bias Dashboard — Chart Theme presets

Earlier Variations — Core Ghost Candle HTF projection — CRT Lure Stage detection (Pending and Accomplished) — Sweep visualization on ghost candle clusters — Multi-cluster help (TF1, TF2, TF3)

Product Hyperlinks and Help

MT5 Model: https://www.mql5.com/en/market/product/162075

MT4 Model: https://www.mql5.com/en/market/product/162556

Free Demo: Out there on each product pages

For questions, setup assist, or function requests, message me straight through MQL5: https://www.mql5.com/en/customers/talkingmarkets

I reply to each message personally.

Disclaimer

This indicator and information are for instructional and analytical functions solely. They don’t represent monetary recommendation or buying and selling indicators. All buying and selling includes threat. Previous efficiency doesn’t assure future outcomes. Use discretion and correct threat administration always.

Sample Page Title