Sample Page Title

This information is designed for each freshmen and superior customers.

It applies to each merchandise:

The best way to use this information

• In case you are new, begin with Fast Begin.
• In case you already perceive the fundamentals, go to Enter Information by Part.
• In order for you a ready-made configuration thought, go to Really helpful Setup Recipes.

1. Platform combos

Use solely the MT5 model for:

Use solely the MT4 model for:

Use each variations for:

In order for you cross-platform copying, each merchandise have to be put in on the proper terminals.

2. Fast Begin for Inexperienced persons

Aim of the primary check

Don’t attempt to configure the whole lot directly. The perfect first check is:

• one transmitter
• one receiver
• one image
• one very small demo commerce

The primary settings you want first

• Mode: TX / RX / BOTH / OFF
• Channel ID (should match on TX & RX)
• TX ID (distinctive sender title)
• RX ID (distinctive receiver title)
• Lot mode (Fastened/Mult/Danger/…)
• Fastened lot (LotMode=Fastened) or Lot multiplier (LotMode=Multiplier)
• Image map: SRC=DST;SRC2=DST2 provided that dealer image names are totally different

For the primary demo check, go away the superior settings at default values.

Step-by-step first setup

1. Connect the EA to the grasp terminal chart.
2. Set Mode: TX / RX / BOTH / OFF to TX.
3. Connect the EA to the receiver terminal chart.
4. Set Mode: TX / RX / BOTH / OFF to RX.
5. On each terminals, use the identical Channel ID (should match on TX & RX).
6. On the grasp terminal, set TX ID (distinctive sender title) to one thing clear, for instance TX1.
7. On the receiver terminal, set RX ID (distinctive receiver title) to one thing clear, for instance RX1.
8. On the receiver, set Lot mode (Fastened/Mult/Danger/…) to Fastened.
9. Then set Fastened lot (LotMode=Fastened) to a small worth equivalent to 0.01.
10. Maintain Copy SL/TP enabled.
11. Maintain Auto-recover (auto resync on mismatch) enabled.
12. Maintain RX snapshot on begin (copy open trades) enabled.
13. Allow AutoTrading.
14. Open one small demo commerce on the transmitter terminal.
15. Affirm that the commerce is copied to the receiver terminal.

Really helpful newbie profile

• Mode: TX / RX / BOTH / OFF = TX on grasp, RX on receiver
• Channel ID (should match on TX & RX) = similar on each terminals
• TX ID (distinctive sender title) = TX1
• RX ID (distinctive receiver title) = RX1
• Lot mode (Fastened/Mult/Danger/…) = Fastened
• Fastened lot (LotMode=Fastened) = 0.01
• Copy SL/TP = enabled
• Auto-recover (auto resync on mismatch) = enabled
• RX snapshot on begin (copy open trades) = enabled
• RX auto-detect prefix/suffix = enabled

3. Setup by use case

MT5 to MT5

1. Set up the MT5 product on each MT5 terminals.
2. Set one terminal to TX.
3. Set the opposite terminal to RX.
4. Use the identical Channel ID (should match on TX & RX).
5. Use a transparent transmitter ID and receiver ID.
6. Use a easy fastened lot on the receiver for the primary check.
7. Open one small demo commerce and ensure the copy.

MT4 to MT4

1. Set up the MT4 product on each MT4 terminals.
2. Set one terminal to TX.
3. Set the opposite terminal to RX.
4. Use the identical Channel ID (should match on TX & RX).
5. Use a transparent transmitter ID and receiver ID.
6. Use a small fastened lot on the receiver.
7. Open one small demo commerce and ensure the copy.

MT5 to MT4

1. Set up the MT5 product on the MT5 terminal.
2. Set up the MT4 product on the MT4 terminal.
3. Set the MT5 terminal to TX.
4. Set the MT4 terminal to RX.
5. Use the identical Channel ID (should match on TX & RX).
6. Verify image names on each brokers.
7. If image names differ, use Image map: SRC=DST;SRC2=DST2 or prefix/suffix settings.
8. Use a small fastened lot for the primary check.
9. Open one demo commerce on the MT5 terminal and ensure the copy on MT4.

MT4 to MT5

1. Set up the MT4 product on the MT4 terminal.
2. Set up the MT5 product on the MT5 terminal.
3. Set the MT4 terminal to TX.
4. Set the MT5 terminal to RX.
5. Use the identical Channel ID (should match on TX & RX).
6. Verify image names on each brokers.
7. If wanted, configure image mapping.
8. Use a small fastened lot for the primary check.
9. Open one demo commerce on the MT4 terminal and ensure the copy on MT5.

One transmitter to a number of receivers

1. First make one transmitter and one receiver work accurately.
2. Add the second receiver solely after the primary receiver is confirmed working.
3. Use the identical Channel ID (should match on TX & RX) for all terminals in the identical group.
4. Use one clear transmitter ID on the grasp terminal.
5. Use a unique RX ID (distinctive receiver title) for every receiver, equivalent to RX1, RX2 and RX3.
6. Configure lot settings individually on every receiver if wanted.
7. Take a look at every receiver with a small commerce earlier than reside use.

4. What is often copied

• market orders
• pending orders
• order modifications
• full closes
• partial closes

This makes the copier appropriate for actual each day use, not solely easy order opening.

5. Enter Information by Part

This part explains the seen enter labels proven within the EA settings window.

The best way to learn this part

• What it does = the aim of the setting
• Use it when = when you might need to change it
• Newbie suggestion = the most secure beginning strategy

===== 1) QUICK SETUP =====

That is crucial part for first-time customers. Most customers can full the primary profitable check utilizing solely this part.

Mode: TX / RX / BOTH / OFF

• What it does: units the function of the terminal.
• Use it when: you resolve whether or not this terminal ought to ship trades, obtain trades, do each, or keep inactive.
• Newbie suggestion: use TX on the grasp terminal and RX on the receiver terminal.

Channel ID (should match on TX & RX)

• What it does: defines the native copy channel utilized by the transmitter and receiver.
• Use it when: you need to create one copy group or separate a number of copy teams.
• Newbie suggestion: use the identical easy channel worth on either side, for instance CH01.

TX ID (distinctive sender title)

• What it does: offers the transmitter a transparent id.
• Use it when: you need the receiver to comply with a particular grasp clearly.
• Newbie suggestion: use a easy worth equivalent to TX1 or MASTER1.

RX ID (distinctive receiver title)

• What it does: offers the receiver its personal id.
• Use it when: you need to distinguish one receiver from one other, particularly in multi-receiver setups.
• Newbie suggestion: use values equivalent to RX1, RX2 and RX3 for various receivers.

Image map: SRC=DST;SRC2=DST2

• What it does: maps supply dealer image names to receiver dealer image names.
• Use it when: image names are totally different between brokers.
• Newbie suggestion: go away empty except symbols are totally different. Instance: EURUSD=EURUSDm;XAUUSD=GOLD.

RX image prefix

• What it does: provides a prefix to the receiver image title.
• Use it when: the receiver dealer makes use of a standard prefix on many symbols.
• Newbie suggestion: go away empty except you already know the dealer makes use of a standard prefix.

RX image suffix

• What it does: provides a suffix to the receiver image title.
• Use it when: the receiver dealer makes use of a standard suffix equivalent to m or .a.
• Newbie suggestion: go away empty except you understand a suffix is required.

RX auto-detect prefix/suffix

• What it does: tries to detect widespread image naming variations mechanically.
• Use it when: brokers use comparable names with widespread prefixes or suffixes.
• Newbie suggestion: hold enabled.

Lot mode (Fastened/Mult/Danger/…)

• What it does: decides how receiver lot measurement is calculated.
• Use it when: you need same-size copying, scaled copying, fixed-lot copying or risk-based copying.
• Newbie suggestion: begin with Fastened or Multiplier.

Fastened lot (LotMode=Fastened)

• What it does: units the receiver lot measurement when lot mode is Fastened.
• Use it when: you desire a easy, fixed receiver lot measurement no matter transmitter measurement.
• Newbie suggestion: begin with 0.01 on demo.

Lot multiplier (LotMode=Multiplier)

• What it does: multiplies the transmitter lot measurement by a selected issue.
• Use it when: you need the receiver to repeat bigger or smaller tons proportionally.
• Newbie suggestion: begin with a conservative worth equivalent to 0.5 or 1.0.

RX magic quantity (tag copier trades)

• What it does: tags receiver-side copier trades with a magic quantity.
• Use it when: you need copier trades to be separated from different trades on the receiver account.
• Newbie suggestion: go away the default worth except you already use a magic-number workflow.

Copy SL/TP

• What it does: copies cease loss and take revenue to the receiver facet.
• Use it when: you need copied trades to incorporate the unique protecting ranges and targets.
• Newbie suggestion: hold enabled.

Max unfold (factors, 0=off)

• What it does: blocks or delays receiver execution when unfold is just too excessive.
• Use it when: you need further safety throughout unhealthy unfold situations.
• Newbie suggestion: hold it easy at first; solely set it if you understand your dealer unfold habits.

Excessive unfold motion: HOLD/RETRY/SKIP

• What it does: defines what the receiver does if unfold is above the allowed restrict.
• Use it when: you need safer or stricter execution habits throughout excessive unfold.
• Newbie suggestion: use HOLD.

Reverse course (BUY<->SELL)

• What it does: reverses the copied commerce course.
• Use it when: you deliberately need opposite-direction copying.
• Newbie suggestion: go away disabled.

Power resync on begin

• What it does: refreshes the receiver state when the EA begins.
• Use it when: you desire a clear alignment after attaching or restarting.
• Newbie suggestion: normally go away at default except you deliberately desire a startup refresh.

Auto-recover (auto resync on mismatch)

• What it does: permits computerized restoration when transmitter and receiver state don’t match.
• Use it when: you need the copier to get well extra simply in sensible use.
• Newbie suggestion: hold enabled.

RX snapshot on begin (copy open trades)

• What it does: permits the receiver to request the present open-state snapshot when it begins.
• Use it when: the receiver might connect after the transmitter already has open trades.
• Newbie suggestion: hold enabled.

Present on-chart panel

• What it does: reveals or hides the panel on the chart.
• Use it when: you desire a seen standing panel on the chart.
• Newbie suggestion: hold enabled in the event you like visible standing data.

Log degree

• What it does: controls how a lot data is written to the journal.
• Use it when: you want extra element for troubleshooting.
• Newbie suggestion: use a traditional data degree for each day use.

===== 2) TRANSMITTER (TX) =====

This part controls what the transmitter sends out.

TX magic filter

• What it does: sends solely trades with a particular magic quantity.
• Use it when: you need to copy just one technique from the grasp account.
• Newbie suggestion: go away broad or default if you wish to copy all trades.

TX copy guide trades

• What it does: consists of manually opened trades in copying.
• Use it when: you commerce manually on the grasp terminal.
• Newbie suggestion: hold enabled if you need guide trades copied.

TX copy EA trades

• What it does: consists of EA-opened trades in copying.
• Use it when: your grasp account trades are opened by knowledgeable advisors.
• Newbie suggestion: hold enabled if you need EA trades copied.

TX embrace pending orders

• What it does: sends pending orders in addition to market orders.
• Use it when: you need cease orders and restrict orders copied too.
• Newbie suggestion: hold enabled for full sensible copying.

TX remark filter

• What it does: sends solely trades whose feedback match particular textual content.
• Use it when: you need to isolate one technique by remark.
• Newbie suggestion: go away empty except you deliberately want comment-based filtering.

TX ignore copier trades

• What it does: prevents the transmitter from re-copying trades created by the copier.
• Use it when: you need to keep away from loops and cleaner TX habits.
• Newbie suggestion: hold enabled.

TX snapshot server

• What it does: permits the transmitter to serve current-state snapshots to receivers.
• Use it when: you need higher late connect, restart alignment and restoration habits.
• Newbie suggestion: hold enabled.

TX publish account data

• What it does: makes transmitter account data out there for scaling and compatibility assist.
• Use it when: you need proportional copying to work extra easily throughout totally different accounts.
• Newbie suggestion: hold enabled.

The remaining TX timing and polling inputs are primarily for superior tuning. Most customers ought to go away them unchanged.

===== 3) RECEIVER (RX) =====

This part controls what the receiver accepts and the way it follows the transmitter.

Auto-apply image map

• What it does: applies image mapping mechanically when mapping is accessible.
• Use it when: you need image mapping to work with out guide re-application.
• Newbie suggestion: hold enabled.

Permit symbols / Block symbols

• What it does: limits copying to chose symbols or blocks undesirable symbols.
• Use it when: you need to copy solely sure devices.
• Newbie suggestion: go away open at first except you deliberately need image filtering.

Permit magic / Block magic

• What it does: filters copied trades by magic quantity on the receiver facet.
• Use it when: you need just some methods to be accepted.
• Newbie suggestion: go away broad except you already use magic-based filtering.

Remark embrace / exclude filters

• What it does: filters copied trades by remark textual content.
• Use it when: you need to enable or block trades by remark naming.
• Newbie suggestion: go away empty except you deliberately need remark filtering.

Permit purchase / Permit promote / Permit market / Permit pending

• What it does: controls which varieties of commerce actions are allowed on the receiver.
• Use it when: you need to block some commerce varieties whereas nonetheless copying others.
• Newbie suggestion: go away all enabled for the primary full demo check.

Quick sequential scan

• What it does: improves receiver-side occasion processing effectivity.
• Use it when: you need regular sensible efficiency.
• Newbie suggestion: hold enabled.

TX discovery interval

• What it does: controls how typically the receiver seems for out there transmitters.
• Use it when: you need to tune detection frequency.
• Newbie suggestion: go away at default.

Skip previous backlog when a brand new TX is discovered

• What it does: skips previous backlog when the receiver finds a transmitter late.
• Use it when: you need sensible current-state attachment reasonably than replaying previous historical past.
• Newbie suggestion: hold enabled.

Request snapshot when a brand new TX is discovered

• What it does: requests a recent current-state snapshot when a brand new transmitter is detected.
• Use it when: you need safer late connect habits.
• Newbie suggestion: hold enabled.

Watch for snapshot earlier than following a brand new TX

• What it does: makes the receiver watch for current-state alignment earlier than absolutely following a newly discovered transmitter.
• Use it when: you desire a safer connect circulate.
• Newbie suggestion: hold enabled.

Lacking-event hole coverage

• What it does: defines what the receiver ought to do if some anticipated copy occasions are lacking.
• Use it when: you need to management whether or not the receiver waits, skips or freezes when there’s a hole.
• Newbie suggestion: use the secure snapshot-based choice.

Snapshot request cooldown

• What it does: limits how typically the receiver sends snapshot requests.
• Use it when: you need to scale back repeated snapshot requests.
• Newbie suggestion: go away at default.

Snapshot wait timeout

• What it does: defines how lengthy the receiver waits earlier than fallback logic applies.
• Use it when: you need to management how strict snapshot ready must be.
• Newbie suggestion: go away at default.

Permit legacy fallback if snapshot wait occasions out

• What it does: permits a suitable fallback restoration path if the popular snapshot path just isn’t out there.
• Use it when: you desire a extra tolerant operational habits.
• Newbie suggestion: hold enabled.

Request snapshot after auto-recover

• What it does: asks for a recent snapshot after computerized restoration.
• Use it when: you need higher re-alignment after restoration.
• Newbie suggestion: hold enabled.

Reconcile interval

• What it does: controls how typically the receiver reconciles its state with the transmitter.
• Use it when: you need to tune how typically consistency checks run.
• Newbie suggestion: go away at default.

Copy delay

• What it does: delays receiver copying deliberately.
• Use it when: you intentionally need delayed execution habits.
• Newbie suggestion: go away unchanged.

Most occasion age

• What it does: blocks receiver actions on occasions which are too previous.
• Use it when: you don’t want delayed previous actions to execute later.
• Newbie suggestion: go away at default except you perceive why you want it.

Use copying expiration / copying expiration time

• What it does: expires very previous delayed opening occasions.
• Use it when: you need stricter management over stale delayed copies.
• Newbie suggestion: go away default except your workflow particularly wants it.

Copying delay

• What it does: delays opening actions deliberately.
• Use it when: you intentionally need delayed-copy habits.
• Newbie suggestion: go away unchanged.

Higher worth solely

• What it does: permits the receiver to open provided that the worth just isn’t worse than the transmitter worth.
• Use it when: you need stricter price-quality management.
• Newbie suggestion: use solely after the fundamental setup is already working properly.

Watch for higher worth on open

• What it does: holds the open till a greater worth situation is met.
• Use it when: you deliberately desire delayed however probably higher entries.
• Newbie suggestion: go away default at first.

Higher worth distinction

• What it does: defines the appropriate worth distinction for better-price logic.
• Use it when: you employ better-price habits and need to tune it.
• Newbie suggestion: go away default except better-price logic is already a part of your plan.

===== 4) LOT / RISK =====

This part controls receiver lot sizing and safety.

Similar-lot adjustment

• What it does: provides or subtracts a small offset from same-lot copying.
• Use it when: you need almost-the-same lot measurement with a small adjustment.
• Newbie suggestion: go away unchanged except you particularly want it.

Per-symbol multiplier map

• What it does: applies totally different lot multipliers to totally different symbols.
• Use it when: you need one image copied extra conservatively than one other.
• Newbie suggestion: go away empty except you want symbol-specific lot management.

Danger %

• What it does: defines the account danger share for risk-based lot modes.
• Use it when: you select a risk-based lot mode.
• Newbie suggestion: don’t begin with this except you already perceive risk-based sizing.

Danger cash

• What it does: defines a hard and fast cash danger for money-based danger modes.
• Use it when: you deliberately need money-risk sizing.
• Newbie suggestion: go away unchanged except you employ that particular lot mode.

Reference TX steadiness

• What it does: offers a steadiness reference for proportional scaling.
• Use it when: you need scaling relative to a selected transmitter steadiness reference.
• Newbie suggestion: go away at default except you deliberately use proportional reference logic.

Digital SL factors

• What it does: offers risk-based lot modes an assumed stop-loss distance if no actual SL exists.
• Use it when: you employ risk-based modes on trades with out precise cease loss values.
• Newbie suggestion: go away unchanged except you already use risk-based sizing.

Minimal lot / Most lot

• What it does: clamps receiver lot measurement inside a secure vary.
• Use it when: you need to shield towards too-small or too-large tons.
• Newbie suggestion: set real looking limits on your dealer and account.

Most publicity tons

• What it does: limits complete receiver publicity.
• Use it when: you desire a onerous cap on copied publicity.
• Newbie suggestion: helpful if you need extra safety.

Most trades per image

• What it does: limits what number of receiver trades might exist for one image.
• Use it when: you need to forestall too many positions on one instrument.
• Newbie suggestion: go away default except you deliberately need this restriction.

Most cut up orders

• What it does: controls how giant receiver positions could also be cut up into a number of orders.
• Use it when: giant receiver quantity might have splitting.
• Newbie suggestion: go away default.

Netting mode

• What it does: controls habits in MT5 netting-style environments.
• Use it when: you’re employed with netting accounts and know which netting habits you need.
• Newbie suggestion: go away at default.

Tons per 1000

• What it does: defines scaling for lot modes primarily based on tons per 1000 account measurement.
• Use it when: you deliberately use that sort of lot mode.
• Newbie suggestion: ignore till you want that particular sizing methodology.

Allow forex conversion

• What it does: helps when transmitter and receiver accounts use totally different currencies.
• Use it when: account currencies differ.
• Newbie suggestion: hold enabled.

Per-symbol max unfold map

• What it does: units totally different unfold limits for various symbols.
• Use it when: you need tighter unfold management on some devices than on others.
• Newbie suggestion: go away empty except you want symbol-specific unfold logic.

Most worth deviation

• What it does: limits how far execution might drift from the transmitter worth.
• Use it when: you need stricter worth management.
• Newbie suggestion: go away default except you already perceive the trade-off.

===== 5) EXECUTION =====

This part controls how receiver commerce actions are executed.

Slippage

• What it does: defines allowed slippage throughout execution.
• Use it when: you need to tighten or loosen execution tolerance.
• Newbie suggestion: go away at default except your dealer requires tuning.

Filling mode

• What it does: units the order filling habits on MT5.
• Use it when: your dealer requires a particular filling mode.
• Newbie suggestion: go away at computerized if out there.

Auto-adjust stops

• What it does: adjusts SL and TP if dealer cease or freeze ranges require it.
• Use it when: you need smoother compatibility throughout brokers.
• Newbie suggestion: hold enabled.

TP multiplier / SL multiplier

• What it does: scales copied TP or SL distances.
• Use it when: you need wider or tighter copied exits than the unique commerce.
• Newbie suggestion: go away default till the fundamental setup is already working.

TP offset / SL offset

• What it does: shifts copied TP or SL by a hard and fast variety of factors.
• Use it when: you need constant offset changes.
• Newbie suggestion: go away default at first.

Shut FIFO

• What it does: closes positions in oldest-first order.
• Use it when: dealer guidelines or your workflow require FIFO habits.
• Newbie suggestion: go away disabled except you particularly want it.

Shut solely at higher worth

• What it does: applies better-price logic to shut operations.
• Use it when: you need stricter price-quality management on closes.
• Newbie suggestion: go away default at first.

Retry failed actions

• What it does: retries commerce actions that fail briefly.
• Use it when: you need extra sensible resilience throughout execution issues.
• Newbie suggestion: hold enabled.

Retry depend / retry delay / retry interval

• What it does: controls how retries are carried out.
• Use it when: you need to tune retry habits for a particular dealer or workflow.
• Newbie suggestion: go away at default.

Cease after N trades

• What it does: stops the receiver after a selected variety of copied trades.
• Use it when: you need limited-duration or limited-count copying classes.
• Newbie suggestion: go away disabled except you want this habits.

Cease after N seconds

• What it does: stops the receiver after a selected period of time.
• Use it when: you need timed copying classes.
• Newbie suggestion: go away disabled except deliberately wanted.

Shut copier trades on cease

• What it does: closes receiver-side copier trades when auto-stop is triggered.
• Use it when: you need cease habits to shut copied publicity as properly.
• Newbie suggestion: use rigorously.

Auto-stop mode: onerous skip / gentle pause

• What it does: defines what cease means operationally.
• Use it when: you need cease to behave like a pause or like a strict skip.
• Newbie suggestion: gentle pause is simpler to grasp for short-term stops.

Multi-receiver secure mode

• What it does: makes multi-receiver setups safer.
• Use it when: one transmitter copies to multiple receiver.
• Newbie suggestion: hold enabled in multi-receiver setups.

Delete processed occasions / transfer processed occasions to finished

• What it does: controls housekeeping for processed native copier occasions.
• Use it when: you deliberately need totally different processed-file dealing with.
• Newbie suggestion: go away defaults unchanged.

===== 6) SAFETY / SESSION =====

This part is for defense guidelines and time filters.

Day by day loss restrict / Day by day loss %

• What it does: protects the receiver after a selected each day loss threshold.
• Use it when: you need each day draw back safety.
• Newbie suggestion: helpful in the event you already know your safety limits.

Most drawdown %

• What it does: protects the receiver from deeper drawdown.
• Use it when: you desire a higher-level account safety rule.
• Newbie suggestion: use provided that you clearly perceive your required safety threshold.

Day by day revenue goal / Day by day revenue %

• What it does: can restrict exercise after a selected revenue goal is reached.
• Use it when: you need to pause or management copying after reaching a each day goal.
• Newbie suggestion: non-compulsory.

Pause on security set off

• What it does: pauses the copier when a security rule is triggered.
• Use it when: you desire a softer security response.
• Newbie suggestion: simpler to grasp than aggressive close-all habits.

Shut all copier trades on security set off

• What it does: closes all copier trades when a security rule is triggered.
• Use it when: you deliberately need robust protecting motion.
• Newbie suggestion: use rigorously.

Security cooldown

• What it does: prevents security actions from repeating too typically in a brief interval.
• Use it when: you need extra secure security habits.
• Newbie suggestion: go away at default.

Allow session filter

• What it does: permits copying solely throughout chosen time home windows.
• Use it when: you need copying restricted to sure classes.
• Newbie suggestion: go away disabled except you deliberately want time filtering.

Allowed weekdays

• What it does: controls which weekdays are allowed for copying.
• Use it when: you need day-based restrictions.
• Newbie suggestion: go away broad except your workflow requires day filtering.

Session time home windows

• What it does: defines the allowed time ranges for copying.
• Use it when: you need copying energetic solely throughout chosen hours.
• Newbie suggestion: go away at default except you deliberately want session-based management.

Apply time filter to open occasions solely or to all occasions

• What it does: decides whether or not time filtering impacts solely new opens or all occasion varieties.
• Use it when: you need stricter session habits.
• Newbie suggestion: making use of time filtering solely to open occasions is simpler to grasp.

===== 7) UI / NOTIFY =====

This part controls messages and panel look.

Notify on trades

• What it does: sends notifications for profitable copied commerce actions.
• Use it when: you need commerce alerts.
• Newbie suggestion: non-compulsory.

Notify on errors

• What it does: sends notifications when one thing goes improper.
• Use it when: you need error alerts.
• Newbie suggestion: helpful in the event you actively monitor the copier.

Push notifications / E mail notifications

• What it does: sends alerts by MetaTrader push or e-mail.
• Use it when: these notification channels are already configured correctly in MetaTrader.
• Newbie suggestion: use provided that your notification setup is already working.

Notification throttle

• What it does: prevents too many notifications from being despatched too shortly.
• Use it when: you need to scale back notification spam.
• Newbie suggestion: go away at default.

Panel place and colours

• What it does: controls the looks and placement of the chart panel.
• Use it when: you desire a totally different visible structure on the chart.
• Newbie suggestion: purely non-compulsory.

===== 8) ADVANCED / DIAGNOSTICS =====

This part is principally for troubleshooting and superior tuning. Most customers ought to go away this part at default values.

Diagnostics mode

• What it does: provides extra detailed logs.
• Use it when: you might be troubleshooting an issue.
• Newbie suggestion: use solely when wanted.

Auto-resync cooldown

• What it does: limits how typically computerized resync might occur.
• Use it when: you need to tune restoration frequency.
• Newbie suggestion: go away default.

Days to maintain native information

• What it does: controls how lengthy native copier information are retained.
• Use it when: you need shorter or longer native historical past retention.
• Newbie suggestion: go away default.

Timer interval / processing limits / scan batch measurement / protocol model

• What it does: controls deeper processing and operational habits.
• Use it when: you already perceive the efficiency or diagnostic motive for altering them.
• Newbie suggestion: go away unchanged.

6. Really helpful Setup Recipes

Recipe A – Best first demo check

• TX on grasp, RX on receiver
• Similar Channel ID on each terminals
• Clear TX ID and RX ID
• Lot mode = Fastened
• Fastened lot = 0.01
• Copy SL/TP = enabled
• Auto-recover = enabled
• RX snapshot on begin = enabled
• Depart the remainder at default

Recipe B – Similar-size copying

• Lot mode = Similar
• Non-obligatory same-lot adjustment provided that wanted
• Verify minimal lot and most lot values

Recipe C – Smaller receiver measurement

• Lot mode = Multiplier
• Lot multiplier = for instance 0.5

Recipe D – Fastened receiver lot

• Lot mode = Fastened
• Fastened lot = for instance 0.01 or 0.02

Recipe E – Completely different dealer image names

• Maintain auto-detect prefix/suffix enabled first
• If wanted, use Image map
• Use prefix or suffix solely when dealer naming is constant

Recipe F – One transmitter to a number of receivers

• Use a unique RX ID for every receiver
• Maintain Multi-receiver secure mode enabled
• Take a look at every receiver individually earlier than reside use

Recipe G – Safer unfold dealing with

• Set an affordable Max unfold
• Use Excessive unfold motion = HOLD

7. Widespread newbie errors

• Utilizing totally different Channel IDs on transmitter and receiver
• Forgetting to allow AutoTrading
• Not checking dealer image title variations
• Altering superior settings earlier than the primary profitable check
• Utilizing loads mode they don’t absolutely perceive
• Utilizing the identical receiver ID for a number of receivers
• Attempting reside accounts earlier than finishing a full demo check

8. Full check earlier than reside use

Earlier than transferring to reside accounts, check the next on demo:

1. Open one market order
2. Affirm the copied open
3. Modify cease loss or take revenue
4. Place one pending order
5. Modify or delete the pending order
6. Shut one commerce absolutely
7. If doable, check one partial shut

9. Troubleshooting guidelines

1. Is one terminal set to TX and the opposite to RX?
2. Do each terminals use the identical Channel ID?
3. Is AutoTrading enabled?
4. Are the image names right on the receiver dealer?
5. Do you want Image map or prefix/suffix settings?
6. Is the receiver lot measurement allowed by the dealer?
7. Are you utilizing the proper MT4 and MT5 merchandise on your platform mixture?
8. Did you permit superior settings at default for the primary check?

10. Closing recommendation

The copier consists of many inputs as a result of it’s designed for each easy and superior workflows. That doesn’t imply it’s good to configure all of them.

The perfect strategy for many customers is:

1. begin with the best doable setup
2. verify one profitable copied demo commerce
3. then configure image dealing with if wanted
4. then modify lot settings
5. solely after that discover filters, security controls and superior choices

This step-by-step strategy offers the quickest success and reduces errors.

Product hyperlinks